It is important to understand that the irontite ceramic seals are very crucial to the people who understand their use in the cooling system. You need to understand that the vehicles require some proper maintenance because they are just like the body of a human being. For a car to work well, there are so many things that must be in place. It is essential to note that the engine of a vehicle plus the cooling system ought to be maintained at a certain temperature after a certain duration.
The irontite ceramic seals are necessary for coating the cooling system in the engine. It is important to know that the engine’s cooling system needs to be cleaned before the application of the irontite ceramic seals. Irontite thoro-flush is the product used in cleaning the system. One is supposed to have in mind that there are certain procedures that can be used to coat the cooling system. The outlined below are some of the tips.
You need to understand that application of the irontite ceramic seal starts with cleaning and draining the coolant system. It is essential to learn that the irontite thoro-flush is the product which is normally used here. This product is used alongside clean water. Make sure to rinse the system more than once to ensure that it is dust-free. The next thing that you are supposed to do is filling the radiator with water and the thro-flush. The hose should be capped directly into the mouth of the radiator. This idea is only applicable for vehicles that do not have the pressurized radiator caps. The next thing that you are supposed to don is shaking the bottle to ensure that the contents are well-mixed. After this, fill the coolant with the ceramics and water. Make sure that the water used is soft to avoid corrosion.
It is important to learn that this product will stain certain areas of the system. Make sure to clean any stains on the cap and the neck of the radiator. You should ensure that you recap the radiator once it is cleared of any stain. The next thing that you are supposed to do is filling the overflow tank with water and then starting the vehicle. Run the engine for at least one hour before flushing it with water. For the system to dry, it is advisable that you open it and leave it for a minimum of 12 hours. After drying, the system should be filled with coolant mixture to prevent further leakages and for lubrication.